輪廓儀

測量功能Main Function

尺寸：包含水平距離、垂直距離、線性距離、半徑、直徑

夾角：包含水平角、垂直角、夾角

位置公差：包含平行度、垂直度

形狀公差：包含直線度、凸度、圓弧輪廓度

輔助生成：包含輔助點、輔助線、輔助圓

Dimension：Contains the horizontal distance, vertical distance, linear distance, radius and diameter

Angle: Horizontal Angle, vertical angle, cross angle

Position tolerance: contains the parallelism and perpendicularity

Form tolerance: contains the straightness, crown, circular arc profile

Auxiliary generation: contains the auxiliary point, auxiliary line, auxiliary circle

粗糙度分析：Ra，Rq，Rz（Ry），Rz（DIN），R3z，Rz（jis），Rp，Rv，Rt，Rsk，Rsm，Rc ，Rpm，RkuRdq，Roc，Mr1，Mr2，Rpk，Rvk，Rk，Rdc，A1，A2，R，Rx，AR，Rcp，Rmax，Rz-ISO等

波紋度分析：wt，wa，wp，wv，wq，wc，wku，wsk，w，wx，wz，wsm，wdc，wte，wmr，Aw，c（wmr）wmr（c），wdq等

原始輪廓  Pt  Pa  Pp  Pv  Pq  Pc  Pku  Psk  Pdq/p△q  Psm  Pdc  Pmr（c） Pz  Pmr   C(pmr)等

技術參數Main Parameters

技術亮點Technical highlights

無需轉換傳感器、測針；實現一次測量 粗糙度、輪廓儀同時分析

No need to change sensors and needles; Simultaneous analysis of roughness and profilometer can be achieved at one time.

一次測量，可分析工件不同區域粗糙度，提高測量效率

One measurement can analyze the roughness of different parts of the workpiece and improve the measuring efficiency.

X軸采用摩擦直線導軌，精度高，壽命長

X-Z1軸采用進口數字式傳感器，精度高、線性好

Z1 axis adopts imported digital sensor with high precision and good linearity

簡易的測針更換設計，一次安裝，無需校正 Simple stylus replacement, one time installation, no need correction

軟件支持中英文一鍵切換  Software supports one-click switching between Chinese and English

支持winXP、win7系統  Support winXP, win7 system

軟件標注與CAD標注一樣 Software annotation is the same as CAD

圓弧、線自動識別 Automatic Recognition of Arc and Line

支持DXF格式文件導入、導出，定制CAD格式導出

Support DXF format file import and export, customize CAD format export

支持連續標注、基準標注、支持任意插入點

Support for continuous annotation, base annotation, and insert points randomly

支持圖形自由旋轉及坐標自由旋轉  Support graphic and coordinate free rotation

原始數據自動保存，便于多次標注The original data can be saved automatically for multiple annotations.

鏡像功能，可保存標注后文件  Mirror function to save annotated files

可對X、Z1軸當前位置進行監控  The current position of X and Z1 axes can be observed.

具有測針自動接觸、自動抬起、自動回退功能 Stylus automatic contact, lifting and return .

可以對操作進行無限次的撤銷及恢復操作  Indefinitely operation for Revoked and Restored

捕捉開關打開時，自動生成及捕捉交點、圓心 、線段中點、端點、圓弧交點、中點、切點等特征點

When the capture switch is turned on, it automatically generates and captures the characteristics of intersection point, circle center, line segment point, end point, arc intersection point, midpoint and tangent point.

即使在非比例放大的情況下，也能進行正常的角度、圓弧、水平、垂直、線性等標注。

Even in the case of non-proportional amplification, normal angle, arc, horizontal, vertical and linear labeling can be annotated normally.

軟件界面：

設備尺寸Equipment size